74F109PC

74F109PC Overview

In the form of 16-DIP (0.300, 7.62mm), it has been packaged. A package named Tubeincludes it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. This electronic flip flop is of type JK Type. The FPGA belongs to the 74F series. It should not exceed 125MHzin terms of its output frequency. A total of 2elements are present in it. There is 17mA quiescent consumption. It is a member of the 74F109 family. There is an electronic component mounted in the way of Through Hole. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 2. The superior flexibility of this circuit is achieved by using 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines. This input has 2lines in it. A -1mAis set for the high level output current. A 20mAvalue is set for low-level output current. If the operating temperature is lower than 70°C, it is recommended. It is recommended that the operating temperature be greater than 0°C. It is powered by 4.5V as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. We are able to achieve a frequency of 125MHz.

74F109PC Features

Tube package
74F series
16 pins
2 Bits

74F109PC Applications

There are a lot of ON Semiconductor 74F109PC Flip Flops applications.

• Circuit Design
• Differential Individual
• Safety Clamp
• Balanced 24 mA output drivers
• Frequency division
• ESD performance
• QML qualified product
• Computing
• High Performance Logic for test systems
• Latch-up performance