74F534SCX

74F534SCX Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74Fseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 100MHz. A total of 1 elements are present. Despite external influences, it consumes 86mAof quiescent current. A total of 20terminations have been recorded. A voltage of 5V is used as the power supply for this D latch. The electronic device belongs to the F/FASTfamily. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.

74F534SCX Features

Tape & Reel (TR) package
74F series

74F534SCX Applications

There are a lot of Rochester Electronics, LLC 74F534SCX Flip Flops applications.

• Differential Individual
• Latch-up performance
• Buffered Clock
• Set-reset capability
• Consumer
• Individual Asynchronous Resets
• CMOS Process
• ESD protection
• Single Down Count-Control Line
• Divide a clock signal by 2 or 4