74FCT162501ATPAG8

74FCT162501ATPAG8 Overview

Embedded in the TSSOP package, it is used by many applications. Packaged in the manner of Tape and Reel. The 56 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. As a rule of thumb, the supply voltage should be maintained above 5V to ensure normal operation. In addition, it is equipped with a 56 pin count. With 18 Bits, you can design electronic parts in a very flexible way. Termination with a 2 termination matches the characteristic impedance of the transmission line. Surface Mount is used to mount this electronic part. 56 pins are used in its design. This one belongs to the FCT family of electronic devices, and there are a number of other devices like it that are part of this family. Power comes from a 5V source. There are 1 elements in it. POSITIVE EDGE is the trigger it is configured with. The number of channels is growing strong/weak: 18. 5V is the supply voltage for this electrical part. It is in this case that 5μA of quiescent current is consumed without being affected by external factors in any way. In order to operate the system, the supply voltage should be as low as possible. 5.5V's maximum supply voltage is supported by it. The high level output current is represented by 24mA. As far as the operating temperature is concerned, it should be higher than -40°C. The operating temperature should be lower than 85°C.

74FCT162501ATPAG8 Features

TSSOP package
56 pin count
56 pins
5V power supplies
1 elements

74FCT162501ATPAG8 Applications

There are a lot of Integrated Device Technology (IDT) 74FCT162501ATPAG8 Universal Bus Functions applications.

• Laptop
• Freezer warning buzzer circuits
• Automatic watering system
• Cell phone
• Automotive voltage monitoring
• Solar street light
• Mountain power station
• Computer
• Car refrigerator
• Temperature detector circuits