ADM6384YKS17D3Z-R7

ADM6384YKS17D3Z-R7 Overview

A total of 4 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for SC-82A, SOT-343 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A total of 4 pins are located on this power management. There are 4 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 13μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM6384, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 13μA.

ADM6384YKS17D3Z-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current

ADM6384YKS17D3Z-R7 Applications

There are a lot of Analog Devices Inc. ADM6384YKS17D3Z-R7 Voltage Supervisors applications.

• emergency room
• Smartphones
• Satellite navigation
• Fire equipment power monitoring system
• Power distribution systems of ICU
• Low voltage/high power - AI, GPU
• Linux and server computing
• Detection of phase sequence
• Computer applications
• Insulation fault location system