ADP1872ARMZ-0.3-R7

ADP1872ARMZ-0.3-R7 Overview

In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. 2.75V~20V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. Various 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Searching "ADP1872" will return other relevant dc to dc converter ics. The switching converter has a total of 10 pins. In particular, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 600mV voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 25A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 84 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers work at 300kHz Hz. To better satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.6V. When running the voltage regulator dc to dc in a circuit, users should apply 5.5V to ensure safety and reliability. It is possible to set the input voltage to 13V for nominal working status. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. 2.75V is the required supply voltage. A dc switcher can only produce an output current of 25A. At its maximum, the switching converter can output 4.67V volts. It runs on a 140μA supply current. A voltage controller's lowest output voltage cannot be less than 600mV. There is a nominal current supply of 70mA for this the controllers dc.

ADP1872ARMZ-0.3-R7 Features

Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
Frequency: 300kHz
MINIMUM OUTPUT VOLTAGE 0.6V

ADP1872ARMZ-0.3-R7 Applications

There are a lot of Analog Devices Inc. ADP1872ARMZ-0.3-R7 DC to DC converter applications.

• Computer rooms
• Electrical power transmission
• Digital display device
• Game consoles
• Medical equipment
• Smoke prevention equipment
• CNC system
• Production lines
• Network technology
• Elevator lighting