ADP1878ACPZ-0.6-R7

ADP1878ACPZ-0.6-R7 Overview

With a 14-WFDFN Exposed Pad, CSP package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 2.95V~20V and has a 2.95V~20V supply voltage. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller can be switched at 600kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. 14 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. ADP1878 can be searched for other relevant dc to dc converter ics. There are 14 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 600mV. It is set to 65 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 600kHz. The value of DC to DC voltage regulator is set to ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V in order to better satisfy the requirement. It is suggested that users apply 20V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. In order to use a 2.95V voltage supply, switching controller is necessary to have one. There will be 30A current output from the dc switcher above 30A. Datasheets state the switching converter can output up to 18V volts. With a current supply of 1.1μA, it runs. The voltage controller's lowest voltage output is not less than 600mV.

ADP1878ACPZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
ALSO AVAILABLE ADJUSTABLE OUTPUT DOWN TO 0.6V

ADP1878ACPZ-0.6-R7 Applications

There are a lot of Analog Devices Inc. ADP1878ACPZ-0.6-R7 DC to DC converter applications.

• Medical equipment
• Television equipment
• Remotely powered electric motors
• Electrical distribution systems
• Medical monitoring systems
• Post equipment
• Product burn-in
• CMM
• Household control circuits
• Radio equipment