ALD2321PCL

ALD2321PCL Overview

Electronic comparator is packaged in 16-DIP (0.300, 7.62mm) for convenient transportation.Output type CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL is used for this comparator.This package has been designed with Tube .In terms of type, this is a typical General Purpose comparator.This is a 2 element comparator.The type of mounting recommended is Through Hole .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 16 .There is a quiescent current of 180μA in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 180μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 180μA .A maximum current of 20pA can be supplied to the device.Temperature higher than 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .There is a maximum voltage supply on the comparator of 10V .Using a voltage as low as 3V is possible for this comparator.The output quality of 2 channels is maintained by cooperating with each other.Comparator electronics is a comparator part from the EPAD? series.

ALD2321PCL Features

CMOS, Complementary, NMOS, Open-Drain, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 180μA

ALD2321PCL Applications

There are a lot of Advanced Linear Devices Inc. ALD2321PCL linear comparators applications.

• Automatic Test Equipment
• Portable Battery Monitoring
• Mobile Phones and Tablets
• Battery-Powered Electronics
• Point of load regulators
• High-Speed Sampling Circuits
• Laptop Computers
• Motor drives
• Self-diagnostics
• Window Comparators, Multivibrators