APX803-23SAG-7

APX803-23SAG-7 Overview

It is mounted through 3 terminals on the power management. It is packaged with Digi-Reel?. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 3. The pins of the power management system count 3. Supply voltage (Vsup) should be at least 1.1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supply current of the power management is 20μA. A similar IC managements number of the manufacturer can always be found by using APX803, the base power ics number. In total, there are 4 inputs on the power management that can be monitored.

APX803-23SAG-7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current

APX803-23SAG-7 Applications

There are a lot of Diodes Incorporated APX803-23SAG-7 Voltage Supervisors applications.

• Telecommunications equipment
• Transformer load monitoring equipment
• DC stabilized power supply module
• Battery cars
• Personal computers
• Medical-specific isolation transformer
• Automotive permanent magnet synchronous motors
• Electrical fire monitoring system
• Detection of phase sequence
• WiFi router