ATF1502AS-10JC44

ATF1502AS-10JC44 Overview

A mobile phone network consists of 32macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is part of the J package.As a result, it has 32 I/O ports programmed.There are 44 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.It is a part of the family [0].Chips are programmed with 44 pins.When using this device, YEScan also be found.A digital circuit is built using 750gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.There are 44 pins on the device.This device operates at a voltage of 5.25Vas its maximum supply voltage.A minimum supply voltage of 4.75V is required for it to operate.There is 125MHz frequency that can be achieved.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.In its simplest form, it consists of 2 logic blocks (LABs).A maximum frequency of less than 125MHzis recommended.In programmable logic, a type of logic can be categorized as EE PLD.

ATF1502AS-10JC44 Features

J package
32 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

ATF1502AS-10JC44 Applications

There are a lot of Atmel (Microchip Technology) ATF1502AS-10JC44 CPLDs applications.

• Power up sequencing
• Cross-Matrix Switch
• Bootloaders for FPGAs
• ROM patching
• Complex programmable logic devices
• Software-Driven Hardware Configuration
• I/O expansion
• Custom state machines
• I/O PORTS (MCU MODULE)
• Random logic replacement