ATF1508AS-7AC100

ATF1508AS-7AC100 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.The device has 80inputs and outputs.There are 100 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 5V voltage supply for this device.The part is included in Programmable Logic Devices.With 100pins programmed, the chip is ready to use.There are 3000 gates, which are devices that acts as a building block for digital circuits. For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.The device is designed with pins [0].In this case, the maximum supply voltage is 5.25V.It operates with the minimal supply voltage of 4.75V.A total of 80programmable I/Os are available.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.8logic blocks (LABs) make up this circuit.There should be a lower maximum frequency than 166.7MHz.In programmable logic, a type of logic can be categorized as EE PLD.

ATF1508AS-7AC100 Features

TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

ATF1508AS-7AC100 Applications

There are a lot of Atmel (Microchip Technology) ATF1508AS-7AC100 CPLDs applications.

• Programmable polarity
• PULSE WIDTH MODULATION (PWM)
• State machine control
• Interface bridging
• Power up sequencing
• Multiple DIP Switch Replacement
• DMA control
• ON-CHIP OSCILLATOR CIRCUIT
• Boolean function generators
• I/O PORTS (MCU MODULE)