BPV23NF

BPV23NF Overview

It is important to note that these photodiodes are packaged in Bulk to prevent damage. To ensure safety, photodiodes are put into Radial, Side View packages. In reverse-bias mode, the photodiodes are capable of withstanding a maximum voltage of 60V. When operating in reverse-bias mode, the photodiodes should not exceed 60V. 2 pins are present on the photodiodes. When the photodiodes are placed in a circuit, they may produce heat 215mW. During operation of a photodiode, the temperature should not exceed 100°C. The minimum operating temperature for the photodiodes, however, should be set to -40°C. Anode voltage for the reverse anode of the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 215mW in a circuit. Using reverse voltage of 60V in the DC circuit may allow the photodiodes to function properly. Photodiodes require an electric potential of 1.3V in order to conduct current. In order to ensure the operation of photodiodes, the breakdown voltage must be 60V. There is 2nA current flowing through a photodiode even in the absence of light input.

BPV23NF Features

Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 870nm ~ 1050nm
Viewing Angle: 120°

BPV23NF Applications

There are a lot of Vishay Semiconductor Opto Division BPV23NF Photodiodes applications.

• Heart Rate Monitoring
• Emitter Alignment
• Vision Controls
• Sterilization Lamp Monitoring
• Machine Controls
• Infrared data transmission
• Shaft encoders
• High speed photo detector
• Position sensing
• Currency Validation