CAT1161LI-30-G

CAT1161LI-30-G Overview

It is mounted through 8 terminals on the power management. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-DIP (0.309, 7.87mm) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Through Hole mount. Power management has a total of 8 pins. This power management system has 8 pins. Supply voltage (Vsup) should be at least 2.7V for this power management. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 3mA volt supply current. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 3.075V to name a few. A similar IC managements number of the manufacturer can always be found by using CAT1161, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 3mA.

CAT1161LI-30-G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2.7V
3mA operating supply current

CAT1161LI-30-G Applications

There are a lot of ON Semiconductor CAT1161LI-30-G Voltage Supervisors applications.

• DVR
• Satellite navigation
• Electronics installed in the vehicle
• Radio
• Household appliances
• External alarm
• Embedded computing
• DC stabilized power supply module
• Rechargeable batteries
• Personal computers