CD4013BCN

CD4013BCN Overview

It is packaged in the way of 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Through Holeis in the way of this electric part. With a supply voltage of 3V~15V volts, it operates. It is operating at -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The 4000Bseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 15.5MHz. D latch consists of 2 elements. There is 4μA quiescent consumption. This D latch belongs to the family of 4013. Input capacitance of this device is 5pF farads. The electronic part is mounted in the way of Through Hole. The 14pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is designed with a number of bits of 2. Despite its superior flexibility, it relies on 2 circuits to achieve it. With a current output of 8.8mA , it offers maximum design flexibility. In order to operate, the chip has 1 output lines. As of now, there are 1input lines. -4.2mAis set as the high level output current. It is set to 4.2mAfor low level output current. Temperatures below 125°Care ideal for operating. Ideally, the operating temperature should be greater than -55°C. The minimal supply voltage is 3V. The maximum supply voltage supported by the flip flop is 15V. It is possible to achieve 15.5MHz frequencies. The building block contains a total of 2 gates. There are 1 inputs involved.

CD4013BCN Features

Tube package
4000B series
14 pins
2 Bits
2 gates

CD4013BCN Applications

There are a lot of ON Semiconductor CD4013BCN Flip Flops applications.

• High Performance Logic for test systems
• Event Detectors
• Supports Live Insertion
• Individual Asynchronous Resets
• Single Up Count-Control Line
• Frequency Dividers
• ESD performance
• Count Modes
• Patented noise
• Set-reset capability