CD74HCT564E

CD74HCT564E Overview

The item is packaged in 20-DIP (0.300, 7.62mm)cases. You can find it in the Tubepackage. T flip flop uses Tri-State, Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 50MHz Hz. In total, there are 1 elements. T flip flop consumes 8μA quiescent energy. A total of 20 terminations have been made. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HCT. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops. Additionally, you may refer to the D latch's additional BROADSIDE VERSION OF 534.

CD74HCT564E Features

Tube package
74HCT series

CD74HCT564E Applications

There are a lot of Rochester Electronics, LLC CD74HCT564E Flip Flops applications.

• Registers
• Consumer
• Functionally equivalent to the MC10/100EL29
• Supports Live Insertion
• Dynamic threshold performance
• Buffered Clock
• Asynchronous counter
• Instrumentation
• Digital electronics systems
• Count Modes