CY2305CSXC-1HT

CY2305CSXC-1HT Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 8 terminations found in this file. For this clock generator ic, a voltage of 3.3V is required. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. 133.33MHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V available for use with this clock PLL. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. There are several logic levels in LVCMOS logic that can be used with this clock generator. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 8 bits. CY2305 is the base part number for finding related electronic parts. There are 8 pins on the frequency generators that are available for use. There is a maximum supply voltage of 3.3V that clock generator can handle. As such, it is often referred to as a kind of Clock Drivers clock PLL. Clock PLL is facilitated with 5 signal outputs to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.2 ns.

CY2305CSXC-1HT Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY2305CSXC-1HT Applications

There are a lot of Cypress Semiconductor Corp CY2305CSXC-1HT Clock Generators applications.

• Multi-function printers
• Local oscillator source in receiver
• Time to digital converters
• Remote telemetry and instrumentation
• Antenna automatic tracking
• Test equipment
• Wireless infrastructure
• Infotainment systems
• MRI
• Simple clock clean-up circuits