EPM240T100I5N

EPM240T100I5N Overview

192 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.A TQFP package contains the item.As a result, it has 80 I/O ports programmed.There are 100 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 2.5V is used to power it.It belongs to the family [0].There are 100 pins on the chip.This device is also capable of displaying [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].In this case, Surface Mountis used to mount the electronic component.This board has 100 pins.A voltage of 3.6V is the maximum supply voltage for this device.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.There are 80 Programmable I/Os.The frequency that can be achieved is 304MHz.It is recommended that the operating temperature be greater than -40°C.It is recommended to keep the operating temperature below 100°C.There are 24logic blocks (LABs) that make up its basic building block.In order to form a fundamental building block, there are 240logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.The devices embed a memory of 1kB available for storing programs and datas.

EPM240T100I5N Features

TQFP package
80 I/Os
100 pin count
100 pins
24 logic blocks (LABs)

EPM240T100I5N Applications

There are a lot of Altera EPM240T100I5N CPLDs applications.

• Parity generators
• Custom shift registers
• DDC INTERFACE
• INTERRUPT SYSTEM
• I/O PORTS (MCU MODULE)
• Interface bridging
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Voltage level translation
• Bootloaders for FPGAs