EPM3128ATC100-7N

EPM3128ATC100-7N Overview

There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the TQFP package.As you can see, this device has 80 I/O ports programmed into it.The device is programmed with 100 terminations.The terminal position of this electrical component is QUAD.It is powered from a supply voltage of 3.3V.It is a part of the family [0].It is equipped with 100 pin count.This device can also display [0].For digital circuits, there are 2500gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.Initially, it requires a voltage of 3Vas the minimum supply voltage.This can be achieved at a frequency of 192.3MHz.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.It is composed of 8 logic blocks (LABs).It is recommended that the maximal frequency be lower than 192.3MHz.A programmable logic type is categorized as EE PLD.

EPM3128ATC100-7N Features

TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

EPM3128ATC100-7N Applications

There are a lot of Altera EPM3128ATC100-7N CPLDs applications.

• Digital systems
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• Timing control
• PULSE WIDTH MODULATION (PWM)
• Power up sequencing
• Address decoding
• Power Meter SMPS
• STANDARD SERIAL INTERFACE UART
• Multiple Clock Source Selection
• Handheld digital devices