EPM3128ATC144-7N

EPM3128ATC144-7N Overview

There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the TQFPpackage, you will find it.There are 96 I/Os on the board.There are 144 terminations programmed into the device.This electrical part is wired with a terminal position of QUAD.An electrical supply voltage of 3.3V is used to power it.The part is included in Programmable Logic Devices.There are 144pins on the chip.This device is also capable of displaying [0].There are 2500 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount.There are 144 pins on the device.In this case, the maximum supply voltage is 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.Currently, there are 96 Programmable I/Os available.A frequency of 192.3MHzcan be achieved.It is recommended that the operating temperature exceed 0°C.The operating temperature should be lower than 70°C.In its simplest form, it consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.Types of programmable logic are divided into EE PLD.

EPM3128ATC144-7N Features

TQFP package
96 I/Os
144 pin count
144 pins
8 logic blocks (LABs)

EPM3128ATC144-7N Applications

There are a lot of Altera EPM3128ATC144-7N CPLDs applications.

• ROM patching
• Interface bridging
• Synchronous or asynchronous mode
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• I/O PORTS (MCU MODULE)
• DDC INTERFACE
• Dedicated input registers
• Wide Vin Industrial low power SMPS
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• Preset swapping