EPM570T100C4N

EPM570T100C4N Overview

There are 440 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.TQFPis the package in which it resides.As a result, it has 76 I/O ports programmed.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.The power supply voltage is 2.5V.This part is part of the family [0].Bulkshould be used to package the chip.In this chip, the 100pins are programmed.Additionally, this device is capable of displaying [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountmounts this electronic component.It is designed with 100 pins.It operates at a maximum supply voltage of 3.6V volts.With a minimal supply voltage of [0], it operates.There are 76 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. In this case, 247.5MHzis the frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 85°C.The program consists of 57 logic blocks (LABs).Basic building blocks have 570logic elements.Maximum frequency should be less than 304MHz.These devices are capable of storing programs and data in 1kBmemory.

EPM570T100C4N Features

TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)

EPM570T100C4N Applications

There are a lot of Altera EPM570T100C4N CPLDs applications.

• Power Meter SMPS
• State machine design
• POWER-SAVING MODES
• Programmable power management
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Parity generators
• DDC INTERFACE
• Handheld digital devices
• D/T registers and latches
• USB Bus