EPM570T100C5

EPM570T100C5 Overview

There are 440 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a TQFP package.This device has 76 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Its terminal position is QUAD.The power source is powered by 2.5Vvolts.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.In this chip, the 100pins are programmed.This device can also display [0].High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].In this case, it is mounted by Surface Mount.There are 100 pins on the device.There is a maximum supply voltage of 3.6V.It is powered by 2.375Vas its minimum supply voltage.There are 76 Programmable I/Os.In this case, 1.8797GHzis the frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.Ideally, the operating temperature should be below 85°C.The program consists of 57 logic blocks (LABs).There are 570 logic elements/cells to form a fundamental building block. The maximum frequency should not exceed 304MHz.In the devices, there is a memory of 1kBthat can be used to store programs and data.

EPM570T100C5 Features

TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)

EPM570T100C5 Applications

There are a lot of Altera EPM570T100C5 CPLDs applications.

• Battery operated portable devices
• Multiple DIP Switch Replacement
• Programmable polarity
• I/O PORTS (MCU MODULE)
• Address decoding
• Storage Cards and Storage Racks
• Custom shift registers
• Wide Vin Industrial low power SMPS
• Boolean function generators
• Software Configuration of Add-In Boards