EPM7128AETC100-7

EPM7128AETC100-7 Overview

There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.The device is programmed with 84 I/Os.It is programmed to terminate devices at [0].Its terminal position is QUAD.It is powered from a supply voltage of 3.3V.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Bulk.Chips are programmed with 100 pins.A digital circuit can be constructed using 2500gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].Surface Mountmounts this electronic component.There are 100 pins embedded in the device.A maximum supply voltage of 3.6Vis used in its operation.With a minimal supply voltage of [0], it operates.There are 84 Programmable I/Os.There is a maximum frequency of 166.67MHz.In order to operate properly, the operating temperature should be higher than 0°C.Temperatures should not exceed 70°C.In its simplest form, it consists of 8 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types can be divided into EE PLD.It is configured with 84 output.

EPM7128AETC100-7 Features

TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
84 outputs

EPM7128AETC100-7 Applications

There are a lot of Altera EPM7128AETC100-7 CPLDs applications.

• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• Power Meter SMPS
• Address decoding
• Power up sequencing
• I/O PORTS (MCU MODULE)
• LED Lighting systems
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Custom state machines
• Complex programmable logic devices