EPM7160EQC160-20

EPM7160EQC160-20 Overview

There are 160 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the PQFPpackage, you will find it.This device has 104 I/O ports programmed into it.It is programmed that device terminations will be 160 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It has 160pins programmed.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.As a building block for digital circuits, there are 3200gates.The supply voltage should be maintained at 5V for high efficiency.In this case, EEPROMwill be used to store the data.Surface Mountis used to mount this electronic component.The device is designed with pins [0].In this case, the maximum supply voltage is 5.25V.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 104.There is 83.33MHz frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.There are 10logic blocks (LABs) that make up its basic building block.The maximal frequency should be lower than 100MHz.There is a type of programmable logic called EE PLD.

EPM7160EQC160-20 Features

PQFP package
104 I/Os
160 pin count
160 pins
10 logic blocks (LABs)

EPM7160EQC160-20 Applications

There are a lot of Altera EPM7160EQC160-20 CPLDs applications.

• Configurable Addressing of I/O Boards
• Portable digital devices
• State machine control
• Page register
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Power automation
• Custom shift registers
• POWER-SAVING MODES
• Preset swapping
• I/O PORTS (MCU MODULE)