EPM7256AEFC256-7

EPM7256AEFC256-7 Overview

There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.The device is programmed with 164 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 3.3V volts.There is a part in the family [0].It is programmed with 256 pins.If you use this device, you will also find [0].It is possible to construct digital circuits using 5000gates, which are devices that serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.There are 256 pins embedded in the device.A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for it to operate.There are a total of 164 Programmable I/Os.In this case, 166.67MHzis the frequency that can be achieved.It is recommended that the operating temperature exceed 0°C.A temperature lower than 70°Cis recommended for operation.There are 16logic blocks (LABs) that make up its basic building block.It should be below 172.4MHzat the maximal frequency.A programmable logic type can be categorized as EE PLD.

EPM7256AEFC256-7 Features

FBGA package
164 I/Os
256 pin count
256 pins
16 logic blocks (LABs)

EPM7256AEFC256-7 Applications

There are a lot of Altera EPM7256AEFC256-7 CPLDs applications.

• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Pattern recognition
• Wide Vin Industrial low power SMPS
• High speed graphics processing
• Boolean function generators
• Programmable polarity
• Multiple Clock Source Selection
• Software-Driven Hardware Configuration
• Parity generators
• Synchronous or asynchronous mode