EPM7256EGC192-12

EPM7256EGC192-12 Overview

There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).As a result, it has 164 I/O ports programmed.Devices are programmed with terminations of [0].This electrical part has a terminal position of PERPENDICULARand is connected to the ground.Power is provided by a supply voltage of 5V volts.There is a part in the family [0].There are 192pins on the chip.The device can also be used to find [0].A digital circuit can be constructed using 5000gates.If high efficiency is to be achieved, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mount, Through Holeis used to mount this electronic component.The 192pins are designed into the board.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.A programmable I/O count of 164 has been recorded.There is 125MHz frequency that can be achieved.In order to operate properly, the operating temperature should be higher than 0°C.The operating temperature should be lower than 70°C.There are 16logic blocks (LABs) that make up its basic building block.The maximum frequency should not exceed 90.9MHz.There is a type of programmable logic called EE PLD.

EPM7256EGC192-12 Features

164 I/Os
192 pin count
192 pins
16 logic blocks (LABs)

EPM7256EGC192-12 Applications

There are a lot of Altera EPM7256EGC192-12 CPLDs applications.

• Parity generators
• Protection relays
• Programmable power management
• Address decoding
• Battery operated portable devices
• DMA control
• ON-CHIP OSCILLATOR CIRCUIT
• Interface bridging
• Software Configuration of Add-In Boards
• ToR/Aggregation/Core Switch and Router