LC4064C-75TN100I

LC4064C-75TN100I Overview

There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 64 I/Os on the board.It is programmed that device terminations will be 100 .As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 1.8V.The part belongs to Programmable Logic Devices family.Trayshould be used for packaging the chip.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.There are 100pins on the chip.It is also possible to find YESwhen using this device.According to the LC4064, its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis the mounting point of this electronic part.There are 100pins on it.There is a maximum supply voltage of 1.95Vwhen the device is operating.With a minimal supply voltage of [0], it operates.In total, there are 4 logic elements/blocks.There are 272 Programmable I/Os.In this case, 178.57MHzis the frequency that can be achieved.The status of input signals is detected by 10dedicated inputs.There are 36 logic elements/cells to form a fundamental building block.

LC4064C-75TN100I Features

100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins

LC4064C-75TN100I Applications

There are a lot of Lattice Semiconductor Corporation LC4064C-75TN100I CPLDs applications.

• Preset swapping
• Parity generators
• Software Configuration of Add-In Boards
• Page register
• Handheld digital devices
• Programmable polarity
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Digital designs
• Software-driven hardware configuration
• Field programmable gate