M4A5-128/64-10VI

M4A5-128/64-10VI Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.There are 64 I/Os programmed in it.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 5V.It is included in Programmable Logic Devices.The chip should be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.When using this device, YEScan also be found.The M4A5-128shows its related parts.A digital circuit can be constructed using 5000gates.High efficiency requires a voltage supply of [0].For data storage, EEPROMis adopted.This device is mounted by Surface Mount.There are 100 pins on the device.It operates at a maximum supply voltage of 5.5V volts.In order for it to operate, a supply voltage of 4.5Vis required.This device runs on 5Vvolts of electricity.A total of 97Programmable I/Os are present.It is recommended that the maximum frequency be less than 100MHz.Input signals are detected using 2dedicated inputs.

M4A5-128/64-10VI Features

100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pins
5V power supplies

M4A5-128/64-10VI Applications

There are a lot of Lattice Semiconductor Corporation M4A5-128/64-10VI CPLDs applications.

• Programmable power management
• Storage Cards and Storage Racks
• Bootloaders for FPGAs
• Multiple Clock Source Selection
• ROM patching
• D/T registers and latches
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• POWER-SAVING MODES
• Battery operated portable devices