MC74ACT74DTR2

MC74ACT74DTR2 Overview

The package is in the form of 14-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. This type of FPGA is a part of the 74ACT series. There should be no greater frequency than 210MHzon its output. In total, it contains 2 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74ACT74. Power is supplied from a voltage of 5V volts. A 4.5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of ACT. The electronic part is mounted in the way of Surface Mount. The 14pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There are 1bits in this flip flop. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The power supply is 5V. A total of 1input lines have been provided.

MC74ACT74DTR2 Features

Tape & Reel (TR) package
74ACT series
14 pins
1 Bits
5V power supplies

MC74ACT74DTR2 Applications

There are a lot of ON Semiconductor MC74ACT74DTR2 Flip Flops applications.

• Pattern generators
• Modulo – n – counter
• Data Synchronizers
• Latch-up performance
• Set-reset capability
• Frequency division
• Data transfer
• Asynchronous counter
• Supports Live Insertion
• Safety Clamp