MC74HC595ADG

MC74HC595ADG Overview

This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). A total of 16 terminations can be found on the chip. Presented in a case of Tube. There is 3V operating supply voltage listed on the part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -55°C~125°C. Votage is provided within 2V~6V. In this case, the electrical component belongs to the series 74HC. Similar parts can be found by searching for the 74HC595 family. For this part, Vsup should not be less than 2V. There is a capability to deliver voltage at 2/6V. It should not exceed 6V in terms of the supply voltage (Vsup). It is necessary to operate 3 output lines of the system. There is a quiescent current of 4μA running through it. In this device, there are 1 circuits that are active at the same time. Its frequency is set to 35MHz. It is equipped with 9 outputs.

MC74HC595ADG Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
It supplies 2/6V power
With 3 output lines
Quiescent Current at 4μA

MC74HC595ADG Applications

There are a lot of ON Semiconductor MC74HC595ADG Shift Registers applications.

• Pseudo Random Pattern Generator
• Data Format Converters
• Data Processors
• Remote control holding register
• Dual-rank shift, hold, and bus applications
• Parallel to serial converter
• Serial-to-parallel data conversion
• Counter
• Parallel data
• Generate time delay toward digital circuits