MC74HCT374ADWG

MC74HCT374ADWG Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. Package Tubeembeds it. As configured, the output uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. In order for it to function properly, its output frequency should not exceed 30MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HCT374 family. A voltage of 5V is used to power it. A JK flip flop with a 10pFfarad input capacitance is used here. In terms of electronic devices, this device belongs to the HCTfamily of devices. It is mounted in the way of Surface Mount. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 8bits. In view of its reliability, this D flip flop is a good fit for RAIL. A power supply of 5Vis required to operate it. A total of 2ports are embedded in the D flip flop. Optimal efficiency requires a supply voltage of 5V. There are no output lines on the JK flip flop. There are 8 channels available.

MC74HCT374ADWG Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MC74HCT374ADWG Applications

There are a lot of ON Semiconductor MC74HCT374ADWG Flip Flops applications.

• Frequency Divider circuits
• ESCC
• Clock pulse
• Frequency Dividers
• Data Synchronizers
• CMOS Process
• Patented noise
• Reduced system switching noise
• Single Down Count-Control Line
• Circuit Design