MCP100-270HI/TO

MCP100-270HI/TO Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. A Bulk package is used to package the power management. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. There are TO-226-3, TO-92-3 (TO-226AA) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When a supply voltage of 2.55V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The mount is provided by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 60μA for the power management. A similar IC managements number of the manufacturer can always be found by using MCP100, the base power ics number. The maximum supply temperature voltage supervisor can handle is 60μA.

MCP100-270HI/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

MCP100-270HI/TO Applications

There are a lot of Microchip Technology MCP100-270HI/TO Voltage Supervisors applications.

• Leakage protection
• Satellite navigation
• Leakage current detection
• Radio
• Military electronics
• Medical-specific insulation monitor
• Microprocessor system
• Cloud computing
• Battery cars
• Personal computers