MCP102-300E/TO

MCP102-300E/TO Overview

Power management is mounted through 3 terminals. Packaged in the form of a Bulk, power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 1. Through Hole mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. The pins of the power management system count 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 1.75μA. You can always use MCP102, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.75μA.

MCP102-300E/TO Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP102-300E/TO Applications

There are a lot of Microchip Technology MCP102-300E/TO Voltage Supervisors applications.

• Consumer electronics
• Stable power system
• Urban rail transit weak current power monitoring
• Analog circuit
• FPGA design
• Satellite navigation
• Kitchen appliances
• Detection of phase imbalance
• Radar
• emergency room