SN74ALVCH16374KR

SN74ALVCH16374KR Overview

The item is packaged in 56-VFBGAcases. You can find it in the Cut Tape (CT)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74ALVCH series. You should not exceed 150MHzin its output frequency. In total, it contains 2 elements. T flip flop consumes 40μA quiescent energy. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74ALVCH16374. It is powered by a voltage of 1.8V . A 3pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 56. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 16bits has been designed. It is imperative that the supply voltage (Vsup) is maintained above 1.65Vin order to ensure normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D flip flop is embedded with 2ports. In order to operate, the chip has 3 output lines.

SN74ALVCH16374KR Features

Cut Tape (CT) package
74ALVCH series
56 pins
16 Bits

SN74ALVCH16374KR Applications

There are a lot of Texas Instruments SN74ALVCH16374KR Flip Flops applications.

• Computers
• Buffer registers
• Bounce elimination switch
• Load Control
• Control circuits
• Power down protection
• Frequency Dividers
• Divide a clock signal by 2 or 4
• Frequency division
• Parallel data storage