SN74AS825ADW

SN74AS825ADW Overview

24-SOIC (0.295, 7.50mm Width)is the packaging method. There is an embedded version in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is at 0°C~70°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AS series. The list contains 1 elements. As a result, it consumes 73mA quiescent current and is not affected by external forces. A total of 24terminations have been recorded. A voltage of 5V is used to power it. An electronic device belonging to the family AScan be found here. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Additionally, there are WITH TRIPLE OUTPUT ENABLE; WITH CLEAR AND CLOCK ENABLE on the electronic flip flop that can be referred to.

SN74AS825ADW Features

Tube package
74AS series

SN74AS825ADW Applications

There are a lot of Rochester Electronics, LLC SN74AS825ADW Flip Flops applications.

• ESD protection
• Computers
• Synchronous counter
• Convert a momentary switch to a toggle switch
• Common Clocks
• Patented noise
• Latch
• Differential Individual
• Parallel data storage
• Computing