TC54VC4302EMB713

TC54VC4302EMB713 Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for TO-243AA functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 2V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. A total of 3 pins are located on this power management. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 3.6μA. A similar IC managements number of the manufacturer can always be found by using TC54VC4302, the base power ics number. The IC management has a nominal tolerance of 2% that should be noted when measuring and testing.

TC54VC4302EMB713 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current

TC54VC4302EMB713 Applications

There are a lot of Microchip Technology TC54VC4302EMB713 Voltage Supervisors applications.

• Power distribution systems of ICU
• Radio
• Display equipment
• Detection of phase loss
• Kitchen appliances
• Consumer electronics
• External alarm
• Microcontroller system
• Smartphones
• Electrical fire monitoring system