525R-02ILF

525R-02ILF Overview

Embedded in the QSOP package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result of this, we can find 28 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. In this clock generator, Clock is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. There is a maximum frequency of 250MHz Max with this clock-based frequency generator. There is a 28-bit clock-generating IC built specifically for microprocessors in this frequency generator. PLL is designed with 28 pins. There are -40°C operations available on this frequency generator and it operates at low temperatures. At 85°C, this RF synthesizer remains functional despite reduced performance. 2 signal outputs allow for maximi2ation of output frequency. There is no point in supplying this frequency generator with a voltage higher than 5.5V. For this clock generator ic, 3V is the lowest allowable supply voltage. For the time clock generator to operate properly, 8mA of supply current are required.

525R-02ILF Features

Available in the QSOP
Supply voltage of 3.3V

525R-02ILF Applications

There are a lot of Integrated Device Technology (IDT) 525R-02ILF Clock Generators applications.

• Various decoding circuits
• Clock generation systems
• Local oscillators (LOs)
• Frequency Modulation (FM) stereo decoders
• Small signal recovery
• Wireless handsets
• Melting
• Satellite receivers
• Carrier synchronization in wired communication
• Peripheral devices