54FCT244CTDB

54FCT244CTDB Overview

Logical driver uses a neat CDIP package. All of the 2 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic component belongs to the FCT family. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 1mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 12mA to its low level. In high level output mode, the electronic parts may conduct 48mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS DRIVER logic IC. It is sufficient to make 8 outputs.

54FCT244CTDB Features

Bus Driver/Transceivers
High Level Output: 12mA
Low Level Output: 48mA
BUS DRIVER Logic IC

54FCT244CTDB Applications

There are a lot of Integrated Device Technology (IDT) 54FCT244CTDB Buffers & Transceivers applications.

• Cordless telephone
• Tuner
• Changeing the frequency from IF to RF
• Broadcast application
• Telecom and datacom networking applications
• interconnection between computers
• IP cameras
• Home theater wiring-free
• Portable radio
• Desktop PC