601G-01ILF

601G-01ILF Overview

The TSSOP package includes this clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. 16 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. The frequency generator has a maximum frequency of 156MHz. It is a 16-bit clock PLL designed specifically for microprocessors. The frequency synthesizer has 16 pins that are available. Featuring an impressive low-temperature operating performance and -40°C functions, this clock generator is sure to impress. The operating temperature should be lower than 85°C. The output frequency can be amplified as high as possible with its 2 signal outputs. To supply this clock PLL, a voltage higher than 5.5V is unacceptable. Clock PLL operates with the minimal supply voltage of 3V. In order for it to fully perform time clock generator's functions, it needs a supply current of 22mA.

601G-01ILF Features

Available in the TSSOP
Supply voltage of 3.3V

601G-01ILF Applications

There are a lot of Integrated Device Technology (IDT) 601G-01ILF Clock Generators applications.

• PMR (Professional Mobile Radio)
• Microwave backhaul IF
• Simple clock clean-up circuits
• Motor speed controls
• Clock recovery
• Tracking filters
• Instrument
• Cable television converter boxes
• Local oscillator source in receiver
• Antenna automatic tracking