71M6541FT-IGT/F

71M6541FT-IGT/F Overview

This package is packed in Tray. A package called 64-LQFP. It can also be used as a Single Phase meter. The following version of Surface Mount is available. Temperature at -40°C~85°C is extended during operation. Using a 3V~3.6V power supply, it operates as it should. A voltage of 0.8V is present on the low-level I/O ports of this PMIC. This device is capable of delivering voltages of 2V for high-level I/Os on its pins. 64 terminations are included in the part. ANALOG CIRCUIT IC with PMIC technology. The normal voltage required for the part is 3.3V. Devices such as this one require a voltage of 3V or higher to work. It is recommended that the maximum voltage that can be applied to the device should be kept below 3.6V. Logic gate applications are addressed by this 64 solution. There is no need for tools to install or dismount this device as it has been designed as a Surface Mount device. There is a Other Analog ICs for specialized needs in this case. A memory chip must have a voltage no greater than 6.9mA to work properly. It is included in the Single Converter Technology? series. This device can be supplied using 3.3V. Frequency ranges from 5MHz to X. The PMIC in this case has a memory size 64kB embedded in it. As far as memory management is concerned, the PMIC uses FLASH memory.

71M6541FT-IGT/F Features

Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.

71M6541FT-IGT/F Applications

There are a lot of Maxim Integrated 71M6541FT-IGT/F Energy Metering ICs applications.

• Server Backplane Systems
• Power monitoring/power budgeting
• Central office equipment
• Power monitoring instruments
• Telecom Infrastructure
• Subsystem Power Measurement
• Intelligent Power Distribution Units
• Industrial Equipment
• PCs/servers
• Telecommunications and data communications equipment