7200L15TPI

7200L15TPI Overview

PDIP is the package in which FIFO memory chip is contained.Through Hole is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 5V .I found that it has 28 terminations in FIFO means.These are the 28 pins for operation.In order to operate it, it requires 80mA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.Approximately 28 pins are attached to it.Normally, 5V power supplies are owned by the component.Using this gadget, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.

7200L15TPI Features

FIFOs category
Clock frequency of 40MHz

7200L15TPI Applications

There are a lot of Integrated Device Technology (IDT) 7200L15TPI FIFOs Memory applications.

• GPS Offender Tracking
• Product traceability
• SPD for DDR3 Memory Modules
• Smart Meter
• Extended product life cycle
• Transistors
• Buses
• Disk Controllers
• Desktop Computers
• Medical Monitoring Device