7200L25J8

7200L25J8 Overview

You can find FIFO memory chip in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V there is the possibility of high efficiency.32 terminations are contained in FIFO means.32 pins are the operation pins.In order to operate FIFO design, a maximum current of 80mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.It is normal for the component to own 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC's clock runs at a frequency of 28.5MHz .

7200L25J8 Features

FIFOs category
Clock frequency of 28.5MHz

7200L25J8 Applications

There are a lot of Integrated Device Technology (IDT) 7200L25J8 FIFOs Memory applications.

• Test Equipment
• Data
• SPI Bus Flash Memory Device
• Firmware loaders
• Portable Information Devices
• Video Processing
• Optical memories
• A/D output buffers
• Consumer Systems
• Game Controller