7200L50J8

7200L50J8 Overview

You will find FIFO memory chip in the PLCC package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pins are the operation pins.In order to operate it, it requires 80mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 32 pins in total.There are normally 5V power supplies attached to the component.It is also possible to generate RETRANSMIT by using this FIFO memory.A clock on the FIFO memory IC runs at a frequency of 15MHz .

7200L50J8 Features

FIFOs category
Clock frequency of 15MHz

7200L50J8 Applications

There are a lot of Integrated Device Technology (IDT) 7200L50J8 FIFOs Memory applications.

• A/D output buffers
• Programmable Logic Controller
• Video time base correction
• Computer networks
• IP Camera Buffer
• Look-up Tables
• Measurement Equipment
• SPD for DDR3 Memory Modules
• Game Consoles
• Cameras