7201LA15J

7201LA15J Overview

FIFO memory chip is included in the PLCC package.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.The operation pins are 32 pins.In order for FIFO design to operate, a maximum current of 80mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this board.It is normal for a component to be equipped with 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.The FIFO memory IC runs at a frequency of 40MHz .

7201LA15J Features

FIFOs category
Clock frequency of 40MHz

7201LA15J Applications

There are a lot of Integrated Device Technology (IDT) 7201LA15J FIFOs Memory applications.

• Data-acquisition systems
• Consumer
• Event Recorder
• General Data Collection Applications at Low-Temperatures
• PC peripheral
• SPI Bus Flash Memory Device
• High-speed disk
• Firmware loaders
• IP Camera Buffer
• High-speed graphics pixel buffer