7202LA20J8

7202LA20J8 Overview

The PLCC package contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.FIFO means contains 32 terminations.These are the 32 pins for operation.In order to operate it, it requires 80mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The clock of the FIFO memory IC runs at 33.3MHz frequency.

7202LA20J8 Features

FIFOs category
Clock frequency of 33.3MHz

7202LA20J8 Applications

There are a lot of Integrated Device Technology (IDT) 7202LA20J8 FIFOs Memory applications.

• Product traceability
• Event Recorder
• IP Camera Buffer
• Consumer Systems
• HDD
• Signal processing
• SPD for DDR3 Memory Modules
• Fabrication Site
• Cameras
• Data