7202LA35J8

7202LA35J8 Overview

You will find FIFO memory chip in the PLCC package.In this case, it is packaged in case number Tape & Reel .Mounting it in the Surface Mount way is recommended.A supply voltage of 5V is capable of producing high efficiency.32 terminations are contained in FIFO means.The operation pins are 32 pins.The maximum current required for its operation is 80mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.Approximately 32 pins are attached to it.The component normally owns 5V power supplies.This gadget can also generate RETRANSMIT .A clock running at frequency 22.2MHz is used by the FIFO memory IC.

7202LA35J8 Features

FIFOs category
Clock frequency of 22.2MHz

7202LA35J8 Applications

There are a lot of Integrated Device Technology (IDT) 7202LA35J8 FIFOs Memory applications.

• Controlled baseline
• Switches
• Alarm System
• High-speed disk
• Communications
• Down-Hole Energy Drilling
• GPS Offender Tracking
• Medical Monitoring Device
• SPI Bus Flash Memory Devices
• Signal processing