7203L12P

7203L12P Overview

This package is included in PDIP .There's a Bulk on the package.The recommended mounting method for this FIFO products is Through Hole .When the supply voltage is 5V there is the possibility of high efficiency.A total of 28 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 28 pins.In order to operate it, it requires 120mA volts of current.A voltage of 5V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 28 pins in total.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.FIFO memory ICs run at a frequency of 50MHz .

7203L12P Features

FIFOs category
Clock frequency of 50MHz

7203L12P Applications

There are a lot of Integrated Device Technology (IDT) 7203L12P FIFOs Memory applications.

• Data
• Buses
• HDD
• Code converters
• Rate buffers
• Alarm System
• IP Radio
• Seismic Data Collection at Extreme Temperatures
• Cardiac Monitoring Device
• General Data Collection Applications at Extreme High-Temperatures