7204L25P

7204L25P Overview

PDIP is a package that contains FIFO memory chip.Through Hole is recommended as the mounting method.With a supply voltage of 5V volts, high efficiency is possible.A total of 28 terminations can be found in FIFO means.FIFO design has 28 operation pins.For its operation, 120mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.Approximately 28 pins are attached to it.Normally, the component owns 5V power supplies.This gadget can also be used to generate RETRANSMIT .

7204L25P Features

FIFOs category

7204L25P Applications

There are a lot of Integrated Device Technology (IDT) 7204L25P FIFOs Memory applications.

• Rate buffers
• Cardiac Monitoring Device
• IP Camera Buffer
• Firmware loaders
• Wireless
• Communications Systems
• Portable Information Devices
• High-speed disk
• Controlled baseline
• Test site