7205L25TP

7205L25TP Overview

PDIP is a package that contains FIFO memory chip.A memory of 9kB is available for storing applications and data on this FIFO chip.The recommended mounting method for this FIFO products is Through Hole .If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 28 terminations.The operation pins are 28 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 28 pins.A FIFO memory's maximum value of 28.5MHz can be used for regular operation.Normally, 5V power supplies are owned by the component.Using this gadget, RETRANSMIT can also be generated.Using 1 circuits gives FIFO memory chip enhanced flexibility.

7205L25TP Features

9kB memory size
FIFOs category
Frequency at most

7205L25TP Applications

There are a lot of Integrated Device Technology (IDT) 7205L25TP FIFOs Memory applications.

• SPD for DDR3 Memory Modules
• Extended product life cycle
• SPI Bus Flash Memory Device
• Portable Information Devices
• Test site
• Telecommunication
• Consumer Systems
• Product traceability
• Data communications
• Video