7205L35TP

7205L35TP Overview

FIFO memory chip is included in the PDIP package.The package comes in a case of Bulk .It is recommended that memory IC be mounted in the Through Hole direction.It is possible to achieve high efficiency with a supply voltage of 5V .FIFO means contains 28 terminations.28 pin is used for operation.The maximum current required for its operation is 120mA .In order to maximize efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC has a total of 28 pins.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.A clock on the FIFO memory IC runs at a frequency of 22.2MHz .

7205L35TP Features

FIFOs category
Clock frequency of 22.2MHz

7205L35TP Applications

There are a lot of Integrated Device Technology (IDT) 7205L35TP FIFOs Memory applications.

• HDD
• Computer Systems
• Switches
• Controlled baseline
• Test site
• Programmable Logic Controller
• SPI Bus Flash Memory Devices
• Routers
• Network switching/routing
• Firmware loaders