7205L50J8

7205L50J8 Overview

The PLCC package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.These are the 32 pins for operation.In order to operate FIFO design, a maximum current of 120mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It has a total of 32 pins on it.The component normally owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The clock of the FIFO memory IC runs at 15MHz frequency.

7205L50J8 Features

FIFOs category
Clock frequency of 15MHz

7205L50J8 Applications

There are a lot of Integrated Device Technology (IDT) 7205L50J8 FIFOs Memory applications.

• Portable Information Devices
• SPI Bus Flash Memory Devices
• Microprogramming
• Telecommunication
• Signal processing
• Application that requires re-writable nonvolatile parameter memory
• Data communications
• IP Camera Buffer
• Code converters
• Notebook