7208L25J8

7208L25J8 Overview

You can find FIFO memory chip in the LCC package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 32 terminations.32 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this board.A component normally has 5V power supplies attached to it.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 28.5MHz .

7208L25J8 Features

FIFOs category
Clock frequency of 28.5MHz

7208L25J8 Applications

There are a lot of Integrated Device Technology (IDT) 7208L25J8 FIFOs Memory applications.

• Rate buffers
• Communications Systems
• MP3 Interface for Automobile
• General Data Collection Applications at Low-Temperatures
• GPS Offender Tracking
• Laser Receiver System
• Networking
• Magnetic memories
• Multi-stage synchronizer
• Video Processing